How to Cover Exterior Cinder Block Walls (October 2022) Guide

Cinder block walls can be practical and affordable, but they’re not the prettiest alternative, nor are they ideally weatherproof if not finished. The covering of a cinder block wall makes it more in line with the design of the buildings around it and increases its longevity.

There are many methods to tackle the task depending on the design you want. Before applying any kind of cover, you must clean the walls and fix any damaged areas.


The most straightforward method to cover a wall made of cinder blocks is to use the cement surface to make an appearance of concrete. Concrete is a great way to insulate your building and keeps moisture out. It gives a smooth polished surface that you can leave in its natural state or apply paint.

If you’re looking for a vibrant wall, but don’t wish to paint, then concrete pigment is the best way to go. Concrete gives the ability to design any type of texture you’d like that you like, such as polished bristle brushed, or polished.

Surface bonding cement is made up of fiberglass and acrylic to make it more suited to vertical surfaces. Therefore, it’s an option in case you’re not familiar with dealing with concrete.

To use this cement in your concrete, first, make the concrete mix. Wet thoroughly the entire block of cinder. Then, wet it again for 3 to 6 sq. feet. portion of wall. The wall should be damp in order for the mixture to stick properly.

Also Read:  Are You Supposed to Caulk Around a Toilet or Not? (October 2022) Guide

Utilize a trowel or paintbrush and apply an inch-thick thick layer of the mixture as evenly as you can on the tiny area you have re-wet. Re-wet another area and continue working on one area on the wall one at a stretch until it’s completely coated. A sprayer for concrete will allow you to complete the task quicker.


Stucco offers a traditional easy-to-clean finish that is more attractive than concrete and is especially well for homes with a southwestern style. Because stucco is a combination of lime, cement as well as silica, it has the same advantages like concrete.

Like concrete, you’ll have the choice of using concrete pigments and painting walls in your favorite shade.

To apply stucco you’ll require a hawk or a tray with a handle that is in the middle. The process of applying stucco varies by producer, however for the majority of it is necessary the application of a bonding substance using the help of a sprayer or paintbrush and allow it to dry for a few hours.

Then, you’ll apply an initial coat of paint, known as scratch coat. It will take some time to dry and should be misted on a regular basis until it’s dry. In order to finish the task it’s time to finish the coat, in which you can make designs like waves and swirls.

Vinyl Siding

If your house has vinyl siding, adding it to the exterior walls of the outbuildings can provide your home with an improved appearance. It comes in a vast selection of colors and textures and even those that resemble stones and wood, which means it’s simple to achieve the style you desire.

For installing vinyl siding to a wall made of cinder blocks it is necessary to put furring strips onto the wall using nails or screwing them to the joint between blocks. Furring strips are slender lengths of wood that are used to create a space between the walls and siding. Then, you can install the vinyl trim, followed by siding directly onto these furring strips.

Also Read:  Pink Mold Is it Dangerous? (October 2022) Guide

Artificial Stone

The timeless beauty in a natural stone wall can be incorporated into almost any setting. Stone wall panels let you transform your dull block wall into a feature that adds a elegance to it. The veneers appear like natural stone and come in a range of designs, such as slate fieldstone, ledgestone as well as river rocks.

The method for installation will depend on the design you pick, but generally speaking, you’ll require mortar to the pieces of veneer and then press directly onto the wall. To make sure you get the appearance you desire Lay the sections of veneer on the ground according to the pattern you’ve planned for your wall.

Certain veneers, for instance imitation fieldstone, may also require grouting following the installation.

Climbing Plants

If you’d like natural appearance for your walls climbing plants can be an attractive and simple method of achieving it. To allow the plants to spread across the wall, you can attach an edging to it with concrete screws.

You can build your own lattice using thin slats of wood, or for a more rustic appearance, trees tied together using twine or wire. Spacers should be placed between the lattice and the wall to allow the plants space to spread out over the lattice.

When selecting the plants you want to plant take your climate as well as their weight and weight into consideration. The weight of a heavy plant like wisteria could easily tear up the lattice’s lightweight or an entire wall. Ivy, clematis (also known as Cup and Saucer (Cobaea scandens) as well as sweet pea (Lathyrus odoratus) are usually safe options.

Also Read:  Door Mats without Rubber Backing (October 2022) Guide

If you’re fed up of the plain brick wall that is a cinder block at your property There are numerous options for giving it a fresh look. To get a simple and quick surface, you can try stucco or concrete. To give your wall distinctive look you can consider stone wall veneer and climbing trees.

We will be happy to hear your thoughts

Leave a reply

NRX Guide
Enable registration in settings - general