8 Best 3d Printer Controller Boards (September 2022) Reviews

Did you know that there are more than 100 items you can create with the 3D printer? The possibilities are limitless, from kitchen utensils and toys to electronic equipment or water bottle.

This could raise the question of – what is the mechanism that drives the intelligence of the 3D printer.

The controller board is one of the most important components that makes 3D printers work. It is responsible for processing g codes in the firmware and making motions feasible.

If you’re using an older printer model or want to improve your device’s performance, purchasing the top 3D printer controller board is something you’re considering doing.

When you’re looking for a new model, it can be difficult to select the right one due to the many brands and models available on the market.

Don’t worry; I’m here to give you some assistance. I’ll guide you through the best 8 3D printer controllers and assist you in selecting the one that best suits your budget and needs.

Let’s dive in.

Our 8 Best 3d Printer Controller Boards

1. BIGTREETECH SKR Mini E3 V1.2

The first item on our list is the feature-rich BIGTREETECH Mini E3, a V1.2 controller made by the well-known brand Bigtreetech.

It is equipped with a 32-bit ARM Cortex M3 microprocessor; the SKR Mini E3 packs plenty of power. If you’re looking to increase the speed of their 3D printers, this could be an ideal machine to think about. The 32-bit processor that has a 72 MHz speed speeds up printing speed, increasing the efficacy.

The board is equipped with the software that is open source Marlin 2.0. This is an enormous benefit, especially for new users without prior knowledge of G-codes.

Upgrades to the software are easy. It is possible to load the supplied SD card and complete the process quickly. The firmware will load quickly in just 10 seconds.

In terms of power compatibility, there is an advantage in the fact that the unit is flexible and can handle inputs from 12v to 24v.

One of the advantages of a high-quality controller board is its ability to regulate the temperature. In this regard, the controller functions flawlessly. The first thing to note is that it is the PCB is wired in a precise manner to ensure the efficient dissipation of heat.

Once the controller is up and operating, you’ll be amazed at how quiet your printer will become. It’s the TMC2209 drivers who are responsible for this.

If you have a Creality machine, M3 could be the most efficient 3D printer controller upgrade. It’s plug and plays with Ender 3 Pro, and it is also integrated with Ender 5 and a range of other CNC machines.

Key Features:

  • Highly efficient, powerful microprocessor 32 bits ARM Cortex M3.
  • Quality for quiet and efficiency.
  • It supports an LCD with a dimension of 2.8 up to 3.5 inches.
  • Compatibility for use with RGB color LEDs.
  • Flexible power inputs from 12-24v.
  • Compatible with BLTouch’s auto-leveling sensors.

Check Price On Amazon

2. BIGTREETECH Newest SKR Mini E3 V2.0 3D Printer Board

The next one to be released is a fantastic product that is part of the Bigtreetech family: the latest model – SKR Mini V2.0. While there are many similarities to the earlier version (V1.2), there are a few minor distinctions.

This model is equipped with an important feature, the sensorless homing function that the V1.2 is missing. This function allows placing an axis without requiring an actual limit switch. I’m not even able to describe the ease of use and ease of use it can provide.

The most important added features of V2.0 are ZAM and ZBM. ZAM, along with the ZBM. ZBM allows connecting motors to the Z Gantry and makes them run parallel to one 2209. The V1.2 operating the dual Z setup using this board requires an engine splitter.

This time, the entire process is handled by integrated technology. This means that the V2.0 is an ideal choice for those who want a lot of comforts.

Another amazing feature of this device is the clever power loss. Imagine if the power goes out when you’re printing. In most cases, you’ll have to set up your printer again; that takes time and depends on your presence.

But, with V2.0 changes, the situation is different. Its smart data saving feature allows it to continue in the place it was when it left. Such convenience!

The capacity of this board is dramatically increased with the heat bed and hot-end connections. While the V1.2 can draw only 60 amps out of both connectors, the V2.0 draws 85 amps of the hot end and more than 200 amps out of the heated bed.

Why do these ratings have such high power? In the event of power surges, the powerful power handling capabilities provide safety for internal components. Additionally, it provides greater energy dissipation.

If you have an Ender 10s Pro or another CNC device requiring better control and more performance, then the SKR E3 V2.0 is a worthy option.

Also Read:  9 Best Edible Printer For Cakes (September 2022) Reviews

Key Features:

  • Sensorless Homing function.
  • 32bit 72mhz arm level cortex-m3 series microprocessor.
  • High power-handling capacity to ensure security.
  • Excellent heat dissipation.
  • Power-resume functionality after a blackout.
  • Automatic shutdown following the project’s conclusion.
  • It utilizes Marlin 2.0 firmware and comes in a cost-free SD card.

Check Price On Amazon

3. BIGTREETECH DirectSKR Mini E3 V1.2 | Led Screen Controller Board

Another entry from BIGTREETECH comes with amazing features.

Its microprocessor has a 32-bit 3D printer controller with 72MHz of The ARM cortex series. It’s a mighty processor, and its performance is excellent.

Additionally, the device has several ports supporting BL touch and TFT display.

The biggest benefit of purchasing this model is that it comes with TFT35 12864LCD, which is already installed. The LCD is touchscreen-compatible, and, as you would expect, it’s incredibly simple to operate, which makes navigation a breeze.

Do you want you could upgrade your Creality device to support wifi? This is the top 3D printer board that can make that happen. BTT V1.2’s wifi connectivity offers incredible convenience, allowing you to upload images to print remotely without connecting cables. What’s this?

When motor vehicles are involved, the situation can become truly beautiful. If you’ve had to deal with noise, it’s time to find a solution. It’s amazing how quiet your printer will become when you install V1.2 that comes with the TMC2209 driver.

Whether you’re just starting or an experienced user, ease of use can be amazing.

The V1.2 is plug-and-play compatible with many Creality machines, such as Ender 3 and 3 Pro. Installation is simple; it has an LCD screen, and the Marlin 2.0 is already installed.

Key Features:

  • The Robust microprocessor 32-bit is part of the Cortex series.
  • Interface for communication via USB, SD card, and WIFI.
  • Power input from 12v to 24v.
  • Touchscreen-compatible V3.0 TFT35 LCD.
  • Its TMC2209 motor drives make stepper motors extremely silent.

Check Price On Amazon

4. BIGTREETECH 3D Printer Parts Part SKR V1.4

Do you want to increase the power even more? Then this SKR V1.4 made by Bigtreetech is the perfect choice for you. The device may seem small; however, it has massive quantities of power. Its processor is a 32-bit Cortex series with a staggering 100 MHz speed.

This is because the controller boosts printing efficiency and allows you to finish tasks much faster.

One of the most significant characteristics of the V1.4 is the wireless adapter. If you’re a fan of the ease of sending images to printers without the need for cable, it’s fantastic news.

Do you want to receive and send commands using Marlin to an electronic device? If so, you’ll be happy to know that the board is equipped with a connection to an ic2. Alongside the ic2 connection, the board also comes with the SPI connection.

You likely agree that using LED lights on the 3D printer is a wonderful feature. It lets you see the printing process in real time and is much more efficient than printing without a plan.

In most cases, when your printer doesn’t come with a lighting feature, you must buy an adapter for the lighting.

What makes V1.4 distinctive is the fact that it has rows of RGB lights that can be set directly on the board without the need for any adapters.

It is a breeze if you’re in the market for the BL touch feature installed on your printer because of the specific BL touch feature installed on the board. It comes with the probe as well as the servo.

My favorite features of these features are the increase in the number of fans. The board is equipped with four fan pins that can be controlled.

It also improves heat dissipation, and since the pins can be controlled, you can turn them off when printing.

Key Features:

  • 32bit ARM Cortex-M3 series processor that has a 100MHz frequency.
  • Wifi adapter for wireless use.
  • Reserved connections to ic2 and Sp.
  • Four fan pins are dedicated to each fan and can be controlled.
  • The device comes with BL touch support.
  • Pins are specifically designed for closed-loop connections.
  • Compatible with LCD and TFT.

Check Price On Amazon

5. FYSETC Duet 2 wifi V1.04

Its Duet 2 wifi V1.04 is a 32-bit 3D printer controller with up to 250 micro-stepping. You likely don’t require the power, but it’s useful to have it and offers excellent future-proofing.

If you’ve previously used the Duet 2 Ethernet, this board is almost identical but has some additional options. One of the major changes is wireless connectivity, which offers many benefits in connecting devices wirelessly.

Are you searching for a method to silence your printer? This 3D printer motherboard has 2660 TMC stepper drivers that allow the steppers to operate extremely silently.

The thing I am most impressed with concerning these TMC 2660 drivers is that they print with excellent quality, without any marks.

Resetting your 3D printer fast is always a big plus. It’s great to know that this printer comes with not just a reset but an erase button.

The configuration can be made through the firmware, so you won’t have to deal with the hassle of managing the trim port to make adjustments to voltage.

Many people believe it is complicated to operate this board; however, what do you think? If you are able to set up the firmware correctly and everything else is effortless. It is possible to do it on the configurator website as well. The process itself is straightforward and fast.

The software’s interface is very simple to use. It has all the necessary features built in and operates well.

Key Features:

  • 32-bit microprocessor.
  • Ultra-bright and silent 2660 motor driver.
  • The wifi is a dedicated module.
  • USB and SDcard connectors are integrated. USB connectors are both integrated.
  • Duet firmware can be set up through a web-based interface.
  • It has dual extruders; however, it is expandable with five extruders.

Check Price On Amazon

Also Read:  8 Best Chainsaws For Firewood (October 2022)

6. BIQU MKS-Base V1.6 Plate Controller Board

Are you a big fan of the firmware Ramps class? This BIQU MKS-Base V1.6 Plate Controller Board is perfect for you. It comes with Atmega 2560, an 8-bit low-power microprocessor that is flawlessly functioning.

It’s not as robust as 32-bit models; however, it still runs instructions efficiently.

One of the best things about V1.6 is that it has five outputs instead of four to drive stepper motors. So, you can use the drivers that are working for you.

The power input on the board could be 24 or 12 volts, which means you have various options in terms of the power input. I like how positive and negative components are colored differently to avoid confusion.

For communication, the board comes with an interfacing square for the PC, which includes a USB and an SD card.

One of my favorite features is the quiet motor drivers. They aid in the quieter 3D printing process.

Imagine the power going out as you print. When power comes back, you can choose one of these two scenarios that could occur.

If you’re using a standard printer, it will be necessary to configure the printing again. However, if you’re using a V1.6 printer, there’s no need to worry about this process. The V1.6 comes, including resume printing.

The controller board also includes an auto shutdown feature. If the printing process ends and you cannot switch off the device, the board will shut down automatically to save power.

Key Features:

  • 8-bit Atmega2560 microprocessor.
  • Five motor drivers or more.
  • Six endstop connectors that include max and min.
  • It has a USB, SD card, and AUX-1 connectors.
  • The optimal heat dissipation is due to the PCB’s 4-layer design.

Check Price On Amazon

7. BIGTREETECH Direct GTR V1.0 32 Bit Control Board for CPU for 3D Printers

BTT GTR V1.0 is a high-performance motherboard featuring 32bit processor M4 series. It is faster than 168MHZ, which dramatically enhances its performance of its.

It has a specially designed power supply chip that can support 12v-24v power input. It also has an output current capability as high as 3A. It also has an efficiency feature which helps to prevent problems with overheating on the board, even when it’s connected to an input voltage of 24V. That’s an enormous benefit for you right there.

A unique aspect of BTT GTR is its ability to handle many languages, such as simple Chinese, English, and more. It’s amazing the ease of switching between one language and the other with no issue.

If you are looking for motor drivers, this is the most efficient 3D printer controller. It has 6 motor drives compatible with TMC160, TMC2208, and more.

Furthermore, BTT added 3 CNC fan pins, allowing it to distribute heat effectively. In addition, it features slots for touchscreens, which assist in supporting LCDs from 2004 to 12864.

You’re looking for a product that is future-proofed in relation to firmware? You’ll be happy to know the board can be upgraded.

It’s good that you can set up the firmware right from your SD card, making upgrading and installing simple and fast.

If you’re looking to connect wirelessly to devices, then you can with the help of a WIFI serial connection.

The BIGTREETECH GTR V1.0 can support numerous other advanced functions, including filament detection, automatic shutdown after you’ve completed your work, and the ability to resume printing after the blackout. These functions make working with your printer a lot easier and more efficient.

Key Features:

  • Accepts 12 to 24V power supply.
  • High-performance board with 32bits and at 168MHz Cortex M4 Series.
  • 6 Motor drivers to increase power.
  • Supports SD cards.
  • Does not have WIFI printing capabilities.
  • Improved heat dissipation thanks to the mofset tube that is high-performance.

Check Price On Amazon

8. MKS Gen L V1.0 3D PCB Board

If you’re on the stock boards for the Ender 3, you might be able to agree that this low-cost gadget has a variety of challenges.

The biggest problem is that it does not include a bootloader which can be a major obstacle to upgrading firmware, especially for those new to 3D printing.

Furthermore, the device has the smallest microcontroller (Atmega 1284P).

Do you want to get rid of the limitations of factory boards? Then it would help if you had the MKS Gen L V1.0 3D PCB Board that is perfect for you.

The 3D printer board is equipped with a bootloader. So, updating the firmware is easy even for beginners.

This device offers flexibility for five instead of the four motor outputs from the driver. Different drivers are included, including the TMC2208, A4988, and many more.

Instead of just having the max endstop output, Gen L V1.0 comes with both max and min outputs. Gen L V1.0 goes further and includes both the max and min.

One thing I’ve noticed about this particular board is that it does not include the SD card input. It’s brighter in that it has four servo outputs.

Because this board can print resumes, there’s no need to worry about the printing process being completed after the power returns after the blackout.

Additionally, the device is also equipped with an auto shut-off feature.

Key Features:

  • 8-bit Atmega 2560 microprocessor.
  • Utilizes Marlin firmware.
  • Five motor driver outputs.
  • Max and min endstop outputs.
  • Four servo outputs are available for BLTouch.
  • Auto-resume Printing following a blackout.
  • Auto-shutdown is activated after printing has been completed.

Check Price On Amazon

3D Printer Controller Buying Guide

Regarding 3D printers, the controller board is usually known as the mind. It is due to the fact that the device is in charge of a variety of important tasks, including processing the g codes in the firmware. It transforms commands into mechanical movements.

Therefore with no control board, a 3D printer won’t function.

Maybe the controller board from the factory isn’t enough for the task you’re trying to accomplish using your printer. Perhaps you’re planning to upgrade your printer to bring it current with modern technology.

Also Read:  6 Best Glue For PLA Plastic (September 2022) Reviews

No matter what the case, a new PCB could be exactly what you require.

In this section, I’ll guide you through the features you must consider when choosing the ideal 3D printer controller board to meet your requirements.

Find More Information: Why are there Strings in 3D printing? Not sure why your prints are becoming as stringy? There are a few possible reasons and solutions.

Does the Firmware Work?

Before purchasing the controller, you must ensure it is compatible with the printer’s components. Importantly, the firmware is compatible with your 3D printer.

In addition, the components on the board must be compatible with the printer. For example, if your printer is equipped with dual extruders, the board must be designed to handle at minimum two extruders.

The controller board must have enough pins if your printer has a specific amount of fans.

Another factor to think about is the type of printer you’d like to improve the printer. For instance, if your printer is not equipped with sufficient connections, you can purchase an electronic controller board with the connectivity you’d like to be able to.

What are Drivers for Steppers Included?

Stepper drivers are one of the most important components of controller boards. They are accountable for control of the motors via transmitting electric signals to them.

To put things in perspective, the stepper motors regulate the movement of the extruders and the nozzles on the printing bed. When you consider that it is stepper drivers that regulate the action of the stepper motors, it’s simple to comprehend the significance of their function when it comes to the functioning of 3D printers.

When selecting a motherboard based on stepper drivers, There are a few points to consider. First, consider the level of noise.

Drivers such as TMC2209 and 2660 can provide amazing levels of quietness, which is why many like these drivers. They are quite powerful, making printing fast and efficiently possible.

Communication Styles

If you’re 3D printing, you’ll require a source for the images you’ll print. It could be a laptop computer or an SD card, smartphone, mobile, or another device.

This is where the considerations of communication come into play. Consider the available communication ports for the best 3D printer control board.

The most important wired communications ports you might need include mini USB micro SD, type C, A, and USB.

You might also require wireless communications if you’re looking for greater quality of life. Typically, wireless communication for 3D printers is done through wifi.

Wifi is a major advantage that lets you design and prints your designs online without the need for cables.

What Power is Provided?

Processing power is, without doubt, among the most important aspects to consider when looking for the controller board. The older 3D printers used an 8-bit processor. But today, with the advancement of technology, modern printers use the latest 32-bit processors.

Processor power is crucial because it determines the number of calculations the processor can perform per minute. Furthermore, the processor’s power determines the printing device’s effectiveness.

8-bit processors aren’t bad for those who are just starting. If you are serious about productivity, consider a 32-bit 3D printer controller.

People Also asked (FAQs)

What is a 3D PCB Printer?

The controller board is part of the brainstem for a 3D printer. It is the component that converts the firmware’s codes into mechanical components like temperatures and motion.

Why Do I Have to Change the Control Board of My Factory 3d Printer Control Board?

There are various reasons you might want to install an entirely new controller for your 3D printer. The controller might not include the features you require.

For instance, the printer doesn’t have an SD card slot, or you’re looking to add new fans and require a board with many fan pins. If your current printer isn’t wifi compatible, then installing a brand new board that supports this feature could be possible.

What is a 3D Printing Control Board Work?

A control board is a part of the brain of the 3D printer. It transmits precise pulses of current into the motors in the printer that control the precise movements of extruders and 3D printing nozzles.

What should I consider when looking for the right 3D Printing Controller?

Compatibility is the first factor if you are looking for an appropriate controller. Check that the board’s components work with the 3D printer you have. In addition, think about the things you’d like to see, such as connectors, drivers’ wireless capabilities, and many others.

Wrapping up!

Aren’t you often amazed by the complex motions of a 3D printer and its capacity to tackle complex tasks?

Behind the complex device is an essential component known as the controller board. It is responsible for understanding the codes and laying the foundation for the movement made by the extruders and the nozzles. The board also regulates many important processes or elements, such as temperature.

If you’re building your 3D printer or seeking to upgrade your current printer, acquiring the top 3D printer controller board is an essential step in the correct direction.

If you’ve decided to buy the controller board, consider its compatibility with the printer you use.

It would be best if you chose a 32-bit model with good motor drivers for the best efficiency, like TMC2209 or 2660. The information above will help those seeking top-quality products at the lowest cost.

We will be happy to hear your thoughts

Leave a reply

NRX Guide
Logo
Enable registration in settings - general